PRODUCTS

SERVICE

CONTACT

	Cable-TV / Broadband

	UPS

	DC Power Supply

	Cordex System
	Telecommunication
	Industrial
	Inverter
	Batteries
	Controller
	Download

	Photovoltaics/Hybridsystems

Our catalogues

Cordex™ 48V 3.6kW

Modular Switched Mode Rectifier

Data sheet

Downloads

Source of supply

Cordex rectifiers bring advanced technology to the DC power industry. Innovative engineering combines the best in efficiency and reliability meeting the power requirements for a variety of system applications.

The fan cooled Cordex 3.6kW rectifier has extremely high density providing the most power in the least amount of space. A compact 4RU shelf accommodates six rectifiers per 23" shelf and five rectifiers per 19" shelf.

Local and remote setup, adjustment, and control is a simple single-step process with the Cordex CXC System Controller. By utilizing TCP/IP technology, complete configuration and monitoring of power equipment is possible through a network web browser.

Available in 75A @ 48VDC
High power density, over 21kW per 23" shelf
Power limiting and wide range AC input
92% efficiency and power factor correction
Hot swappable, 4RU ultra compact design

Variants

Technical data

Rectifier Module(s)

Electrical Input voltage
Nominal:	208 to 277VAC
Operating:	176 to 312VAC
Extended:	176 to 90VAC (derated power)
Power output:	3600W continuous/module
Input frequency:	45 to 66Hz
Power factor:	>0.99 (50 to 100% load)
THD	<5%
Efficiency:	>92%
Output voltage:	42 to 60VDC
Float Voltage:	Float Voltage:
Output current:	66A @ 54VDC (75A max. 48V)
Load regulation:	<±0,5% (static)
Line regulation:	<±0,1% (static)
Transient response:	±2% for 50 to 100% load step, 2ms recovery time
Voice band noise:	<32dBrnC
Wide band noise:	<30mV RMS (10kHz to 10MHz) <150mV pk to pk (10kHz to 100MHz)
Psophometric noise:	<1.0mV
Acoustic:	<60dBa @ 1m (3ft)
Mechanical Dimensions
mm:	160H x 87W x 300D
inches:	6.3H x 3.4W x 11.8D
Weight:	4.6kg (10lb)
Features
Inidcators:	AC mains OK — green LED Module OK — green LED Module fail — red LED
Controls:	CAN interface to CXC Controller
Adjustments: (via CXC Controller)	Float voltage Equalize voltage High voltage alarm Low voltage alarm High voltage shutdown Current limit Slope Start delay timers
Protection:	Current limit/short circuit Start delay Input/output fuses Output high voltage shutdown Power limiting Thermal foldback/shutdown Input transient AC low line foldback/shutdown AC high voltage shutdown
Environmental
Temperature Operation:	-40 to 65°C (-40 to 149°F)
Storage:	-40 to 85°C (-40 to 185°F)
Humidity	0 to 95% RH non-condensing
Elevation:	-500 to 2800m (-1640 to 9186ft)
Heat dissipation:	<1215 BTU per hour
Shelves
Mechanical 19/23" shelf Dimensions
mm:	177H x 442W x 389D
inches:	6.9H x 17.4W x 15.3D
Weight:	8.5kg (19lb)
Mounting: (5 modules)	Fits 19" rack flush/center mount Fits 23" rack center mount only
23" shelf Dimensions
mm:	177H x 530W x 389D
inches:	6.9H x 20.8W x 15.3D
Weight:	9.5kg (21lb)
Mounting: (6 modules)	Fits 23" racks only flush/center mount
Connections
Input:	Box type terminal block 6 to 16mm2 (10 to 6AWG)
Output:	Bus adapters with 3/8" studs on 1" centers
Chassis ground:	Compression lug 6 to 16mm2 (10 to 6AWG)
CAN communication:	RJ 12 offset
Standards The Cordex 3.6kW is designed to meet the following:
Safety:	CSA C22.2 No 60950-1-03 UL 60950-1 1st Edition CE marked IEC/EN 60950-1
EMC:	ETSI 300 386
Emissions:	CFR47 (FCC) Part 15 Class B ICES-03 Class B EN55022 (CISPR 22) Class B C-tick (Australia) EN 61000-3-2 EN 61000-3-3
Immunity:	EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11 ANSI/IEEE C62.41 Cat B3