| Input OPS |
| AC Input Voltage: |
120Vac or 240Vac |
| AC Input Frequency: |
50/60Hz |
| Surge Protection: |
ANSI/IEEE Std. C62.41 to Category A, B, or C requirements, using a “Ring Wave” or “Combination” waveform, at a level of 6kV |
| Output |
| Operational Output Power: |
30W max. continuous (ONT load ) |
| Output Voltage: |
12Vdc Nominal (Battery voltage upon loss of AC) |
| Output Power Loading: |
Following GR-909 telephone lines in various states, e.g., ringing, off-hook, on-hook, data, and video operation requirements |
| Auxiliary Input Voltage: |
10.5 to 16.5Vdc |
| Physical |
| Housing size (in/cm): |
8.75W x 7.75H x 3.0D/22.4W x 17.7H x 7.62D |
| Weight (lb/kg): |
3/1.4 |
| Battery 7.2Ah (lb/kg): |
5.7/2.6 |
| Battery 12Ah (lb/kg): |
8.4/3.8 |
| Battery |
| Battery Type: |
Maintenance free, leak-proof, sealed VRLA (valve regulated lead acid) |
| Visual Indicators |
| System: |
Green LED Power is available at the output (AC, battery or auxiliary) |
| Battery: |
Green LED Battery discharging to 25% SOC (main or auxiliary)
Green Flash At 25% SOC (main battery) the indicator begins to fl ash |
| Replace Battery: |
Red LED Battery not present or failed self test |
| Auxiliary Power Source: |
Green LED Valid auxiliary power source connected |
| Audible Status Indicators |
| Loss of Input Power: |
Single, one second chirp |
| Low Battery: |
Single chirp every 15 seconds at 25% SOC |
| Replace Battery: |
Double chirp spaced fi fteen minutes apart |
| Push Buttons |
| Silence Alarm: |
Suppresses the audible alarm for 24 hours |
| Battery Emergency Use: |
Accesses reserve battery capacity |
| Agency Compliance |
| System: |
FCC part 15 Class B, CSA-NRTL\C (CSA60950), CE, C-Tick, RoHS to
EU 2002/95/EC, Seismic Zone 4 rated per GR-63 |
| Environment |
| Storage Temperature: |
-40°F to +115°F (-40°C to +46°C) |
| Operating Temperature |
|
| Without Heater: |
-4°F to +115°F (-20C° to +46°C) |
| With Heater: |
-22°F to +115°F (-30°C to +46°C)
Note: Operating temperatures based on AX-LONGBAT-7. |
| Interface |
| DC Output: |
Removable Screw Terminal Plug accepts seven (2) 16AWG and (7) 24AWG wires
Coax F connector POS center (no remote alarms supported) |
| Auxiliary DC Input: |
3.5mm (OD), 1.3mm (Pin, positive) coaxial barrel connector |
| AC Input: |
IEC320/C6 Receptacle |
| Line Cord: |
NEMA 1-15 to IEC 320 C5 (Other cords available upon request) |
| Warranty |
| FlexPoint 1230: |
3 years repair or replace |
| Batteries Available: |
1-year or 3-year |
| Models |
| FP1230-01A |
120Vac 3-Conductor NEMA 5-15 Power Cord |
| FP1230-02B |
240Vac 3-Conductor Schuko Input Power Cord |
| FP1230-02C |
240Vac 3-Conductor United Kingdom Input Power Cord |
| FP1230-02D |
240Vac 3-Conductor Australia/New Zealand Input Power Cord |
| FP1230F-01A |
120Vac 3-Conductor NEMA 5-15 Power Cord F Connector |
| Supporting Options |
| AX-STDBAT-7 |
Battery 7.2AH AGM, 1 year warranty |
| AX-LONGBAT-7 |
Battery 7.2AH AGM, 3 year warranty |
| AX-STDBAT-12 |
Battery 12AH AGM, 1 year Warranty |
| FP1230-CVR |
FlexPoint 1230 12AH battery cover with strap |
| FP1230-HK |
FlexPoint 1230 heater Kit |
| FTTH-CBL |
ONT hook-up cable, 2x16AWG and 5x24AWG, CMX UL listed |
| AUX-CBL |
Cable, auxiliary power Plug 3.0m Long |